Another alternative, which I prefer, is to use the 3.5mm (1.8") phone jack on the rear panel. There is also a RCA Phono jack for PTT. In either case, front or rear panel, you could make a simple adapter cable to go from your non-Elecraft/non-Kenwood microphones.
73, Ed - W0YK > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Greg > Sent: Wednesday, 07 November, 2007 20:00 > To: Bruce Beford; [email protected] > Subject: RE: [Elecraft] Another "K3 is coming question" > > That's correct. Since the Kenwood wiring configuration is > what was used as a standard with the K2 the configuration was > carried over with the K3, but it is not changeable. The > wiring diagram is available in the manual and on the FAQ page. > > > > ------------ > 73, > Greg - AB7R > Whidbey Island WA > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Bruce Beford > Sent: Wednesday, November 07, 2007 7:10 PM > To: [email protected] > Subject: [Elecraft] Another "K3 is coming question" > > > Ken wrote: > > I assume the microphone connector can be configured to suit > different microphones, just like the K2 > > 73! Ken Kopp - K0PP > > N1RX: > > Actually, No. My understanding is that the K3's microphone > connector is configured for the same pinout as Kenwood > radios. (Don't ask -me- why.) It cannot be changed. Plan on > needing a microphone wired for the Kenwood format. > > -Bruce, N1RX > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
