That's correct. Since the Kenwood wiring configuration is what was used as a standard with the K2 the configuration was carried over with the K3, but it is not changeable. The wiring diagram is available in the manual and on the FAQ page.
------------ 73, Greg - AB7R Whidbey Island WA -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bruce Beford Sent: Wednesday, November 07, 2007 7:10 PM To: [email protected] Subject: [Elecraft] Another "K3 is coming question" Ken wrote: I assume the microphone connector can be configured to suit different microphones, just like the K2 73! Ken Kopp - K0PP N1RX: Actually, No. My understanding is that the K3's microphone connector is configured for the same pinout as Kenwood radios. (Don't ask -me- why.) It cannot be changed. Plan on needing a microphone wired for the Kenwood format. -Bruce, N1RX _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
