Hi Roger: Are you using Downloader 1.0.11.19 (or later)? The downloader was upgraded recently and the new one is required to download the new files.
To be sure the files are there, I just checked using the downloader. Here's what it reported: 23:19:08 Enter OnDirectoryReadComplete 23:19:08 Your Folder has the most recent K3 firmware files from Elecraft 23:19:08 Enter OnAllFileDownloadComplete 23:19:08 Enter Finish: Verb OnAllFileDownloadComplete dwError 0 fForceError 0 23:19:08 Enter CFtpElecraft::Close 23:19:08 Enter CFtpElecraft::Close 23:19:15 Ready I'm showing MCU 01.42, DSP1 01.39 currently available. Ron AC7AC -----Original Message----- I am not having success with the Firmware Upload process. OS on old Laptop PC is Windows 2000, K3 Utility loads ok, COM1 selected, selecting the Test Communications yields "K3 is running main program RS232 4800bps" Current versions installed on K3 boards displays as: MCU-1.34 DSP-1.35 The path is C:\Program Files\Elecraft K3 Utility\firmware to receive files. I keep getting the 'missing files' message and to See Help-Troubleshooting. OK, I go to Troubleshooting via the Help page and I must not be holding my mouth right, (fishing talk), but the obvious is not......... Otherwise...K3 #75 is receiving nicely!! and generates RF!! No QSO's yet. The PA module awaits installation. I spent quite a bit of time just looking over the boards under magnification....absolutely amazing...going from the ideas to the physical!!! 73, Roger WA7BOC K3 #75 K2 #755 has a new home in Oregon, once the K3 is all set. _ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
