David, many thanks! You were very close - I had inadvertently soldered the centre of the coax at J13 to the little hole next to hole X, not hole X itself. All working now, covers going back on!
Thanks a lot 73 Stephen On 9/12/07 21:48, "David Pratt" <[EMAIL PROTECTED]> wrote: > In a recent message, Stephen Prior <[EMAIL PROTECTED]> wrote ... >> One more thing I have just noticed - I do have power out on ssb, about 20W >> as measured externally, but the power control still does not have any >> effect. On Tune and CW, there is no externally measure power output on any >> band, whatever the position of the power control. >> >> What have I done?! :-(( > > My guess is that it is something to do with the connection of the > screened cable connecting the two pads on the underside of the main > board. Make sure you have the connections at the right places. I seem to > remember this was quite tricky to get right. I think it's just a matter > of rechecking the installation steps on page 9 of the manual (in my Rev > A March 15 2004). Good luck and let us know when you find the problem. > > 73 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
