> I would appreciate information on using the Heil CC-1K8 cable > with the GM-5 mike. Is the CC-1K8 (red) cable compatable with > the K3 mike connector using the GM-5 mike without changing the > Heil connector pinout?
Based on the published specifications the answer is "Yes" if you turn off any electret bias in the K3 menu. The CC-1K cable is not designed for use with any electret mics so pins 5 and 6 are open. 73, ... Joe, W4TV > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Roy Morris > Sent: Saturday, December 29, 2007 12:12 PM > To: [email protected] > Subject: [Elecraft] Heil Mike Connection > > > There has been so much said about the Kenwood mike pinout for > the K3 (especially pins 5 and 6). I would appreciate > information on using the Heil CC-1K8 cable with the GM-5 > mike. Is the CC-1K8 (red) cable compatable with the K3 mike > connector using the GM-5 mike without changing the Heil > connector pinout? Thanks. Roy Morris W4WFB _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
