Very early-on in the Field test series... LONG before any 'production'
K3s were even considered, there WAS a menu configuration parameter
which allowed the user to vary the CW rise/fall times, by a small
amount. However, it was removed from the menu quite a while ago, in
lieu of a (currently) single fixed setting.
This parameter HAS been discussed within the Field Test group and there
is a possibility (note this word... 'possibility') that rise/fall time
may be added back at a later date, but probably not any time soon...
Wayne has a number of much more important firmware items to address
before this subject is re-addressed.
It's not gong to do much good to beat it (or Wayne) up at this point.
But wait several months, until things slow down a bit, and THEN give
it a shot. It might be considered then.
73,
Tom N0SS
At 03:12 12/30/2007, Ian J Maude wrote:
Greg wrote:
IF this changed, it was VERY VERY early on. I do not remember changing
this, but if I did, it was shortly after the FAQ was first posted. CW rise
and fall have not been part of the firmware for months. Elecraft optimised
these settings for best CW performance.
Doug might be getting confused with the changes to the AGC attack
times? This was made adjustable a short while ago after discussion
on the list.
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
