Hi Lexa,
We had a long thread about CW MOX a while back, and the final statement on the
matter was that there is no delay when used in this way -- on immediately when
you press the switch, off immediately when you release the switch.
Bill W5WVO
Alexandr Kobranov wrote:
John,
as I already comment directly to you - what is important for me is to
know if this delay is also in VOX-off situation. I hope not, only want
to be sure. If VOX-on and semi-BK then I understand and expect such
delay, if VOX-on and full-BK (QSK) there will be also some delay
probably but related to QSK delay which is not important.
So can anybody confirm behaviour (presence of any delay) vhen VOX-off
and XMIT activated/deactivated?
Thanks and 73!
Lexa, ok1dst
John [K7SVV] napsal(a):
Alexandr,
The delay I am referring to only occurs when I am using MOX
and returning to receive mode while in CW mode. I thought I saw the
same symptom yesterday while I was DATA mode and receiving RTTY but
that wasn't the case today when I checked it. I stepped through all of
the modes and I only saw the delay returning to receive while using
MOX in CW mode. I don't see any reason for the delay. When I press XMIT
to
leave xmit mode, I expect the the rig to do just that and with no
delays. I guess I find the delay a bit annoying.
John [K7SVV]
----- Original Message ----- From: "Alexandr Kobranov"
<[EMAIL PROTECTED]> Cc: "Elecraft Mail List"
<[email protected]> Sent: Friday, January 11, 2008 2:26 PM
Subject: Re: [Elecraft] K3: CW delay is used when exiting XMIT mode
manually
Hi John,
sorry for question (as not on my table yet) - is this delay in any
case of CW mode or only when any kind of QSK is active?
I suppose there is PTT mode for CW also and you are right that in
such case there is no reason for any delay. If you have QSK active,
I can understand that there is delay also with MOX using (without
opinion if this is bug or not - simply understand this :-)).
Can you let me know if delay is also in PTT mode?
thanks
lexa, ok1dst
John [K7SVV] napsal(a):
I should have mentioned that this happens in CW mode and not SSB
mode. John [K7SVV]
----- Original Message ----- From: "John [K7SVV]" <[EMAIL PROTECTED]>
To: "Elecraft Mail List" <[email protected]>
Sent: Friday, January 11, 2008 1:41 PM
Subject: [Elecraft] K3: CW delay is used when exiting XMIT mode
manually
I do not see the need for using the CW delay time when manually
exiting xmit mode when I press the XMIT button. I would expect
the rig to return to receive mode as soon as the button is
pressed. If I set the CW delay to zero, the return is
instantaneous. I admit that I only rarely use the manual XMIT
mode but I find it distracting when I do.
John [K7SVV]
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
No virus found in this incoming message.
Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:
269.19.1/1219 - Release Date: 1/11/2008 10:19 AM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
No virus found in this incoming message.
Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:
269.19.1/1220 - Release Date: 1/11/2008 6:09 PM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
