Kristinn:
That feature IS ALREADY AVAILABLE in the K3...!!! Though not quite as easy
to access as one might want for 'daily' access, ALL of the KAT3 tuning values
CAN be viewed in the LCD display: (the last two sentences are the really
important ones here)
KAT3 ATU mode; normally set to BYP or AUTO (you can alternate
between these settings using the [ATU] switch). Modes L1-L8, C1-C8,
and Ct are used to test KAT3 relays. Mode LCSET allows manual
adjustment of L/C/net settings. When in this mode, tapping [ATU
TUNE] shows the L & C value; C is changed with VFO A, L is changed
with VFO B, and [ANT] toggles between Ca and Ct .
73,
Tom N0SS
At 18:20 01/19/2008, you wrote:
While I have not placed an order for a K3 yet, I read with interest about the
features and experiences new users are having with this rig.
I have an idea for a new feature, for Eric, Wayne and the others to think
about. Now that the K3 can read and display the LC settings for the
internal autotuner, wouldn't it be neat to be able to calculate the
corresponding antenna impedance at the given frequency (Z = R +jX)?
Another, related feature, would be an indicator that would show if the
antenna impedance at a given antenna connector and a given frequency is
substantially different from last time. Perhaps a just a brief message like
"New ant Z". This would be useful to determine quickly if something has
changed in the antenna system (bad connection, water in the coax, etc.).
When using an autotuner one may miss this and continue as long as the tuner
fixes the mismatch. Of course we may debate what is a "substantially
different" Z, but I wonder what others think of the idea...
73 - Kristinn, TF3KX
--
View this message in context:
http://www.nabble.com/K3-as-an-antenna-analyzer--tp14976948p14976948.html
Sent from the Elecraft mailing list archive at Nabble.com.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
