Wow - that's pretty damn specific info Joe - thanks very much
On 27/1/08 17:02, "Joe Subich, W4TV" <[EMAIL PROTECTED]> sent: > > David, > > You will need a special RJ-45 to Foster adapter. Add a > 1 uF capacitor in series with the hot lead of the mic > (Pin 1 of the Elecraft connector) and connect a 3.3 - > 4.7K resistor (not critical) between the +5V pin of the > RJ45 and pin 1 of the Foster. > > > Foster RJ-45 > (Elecraft) (Yaesu) > > Mic + 1 -----+--|(----+ 1 > PTT 2 --+ | | 2 > 3 | +-^^^^^------------ 3 +5V > 4 | | +----- 4 Mic - > 5 | +---|----- 5 Mic + > 6 +--------------------- 6 PTT > Mic - 7 ------------------+ +-- 7 GND > GND 8 ---------------------+ 8 > > > 73, > > ... Joe, W4TV >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of David >> Ferrington, M0XDF >> Sent: Sunday, January 27, 2008 5:39 AM >> To: Crafters >> Subject: [Elecraft] [K3] Bias Settings. >> >> >> I bought the Heil Proset to go with my K3 - I'm very pleased >> with it and >> would like to use it with my FT-857 on 2m (until I've got my >> XV144 built). >> >> Can anyone give me information about the bias settings of the K3? >> And possibly suggest how I go about biasing this with the >> FT-857. I can make >> an interface cable for the RJ45 that the 857 uses -- In theory, there is no difference between theory and practice, but in practice there is. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
