Hi Barry,
Yes it's on receive. It's more than leakage, more like both antennas are
connected during receive.
Ed
----- Original Message -----
From: "Barry N1EU" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, February 08, 2008 6:29 AM
Subject: RE: [Elecraft] K3 Rx Antenna Isolation
Perhaps Ed will clarify, but my take is that Ed's post is a different
issue.
I believe he is saying that while he's in RECEIVE mode with the RX ANT
selected, there's leakage of the receive signal on the transmit antenna
feedline into his receiver - poor isolation in the receive antenna
selection.
Personally, I haven't seen this but I haven't listened specifically for it
either.
73,
Barry N1EU
Gary W. Hvizdak wrote:
On Fri 8 Feb 2008 at 01:07:35 EST, Ed Gilliland (W5TM) wrote ..
I'm have poor isolation between the transmit antenna (ANT1) and my
Beverage
(RX ANT IN). I have to switch to ANT2 to get rid of the noise from the
transmit antenna. As new as I am to the K3 I may have an option set
wrong.
--
Ed,
Wayne's recent post entitled "KXV3: (1) RX ANT signal level during
TX;
(2) spectra at buffered IF output" may address your question. You can
find his post in the online Reflector archives at ...
http://mailman.qth.net/pipermail/elecraft/2008-February/082024.html
73,
Gary KI4GGX
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
View this message in context:
http://www.nabble.com/K3-Rx-Antenna-Isolation-tp15350020p15354381.html
Sent from the Elecraft mailing list archive at Nabble.com.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
