It is on the list Dave.  But please don't expect every request to show up in 
the very next 
firmware release.  It's just not possible.

The MON level was cut back some for a reason.  Once that issue is sorted out, I 
believe 
Wayne will kick it back up again.


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009

On Tue Feb 12  4:31 , "T. David Yarnes"  sent:

>
>I now have firmware V. 1.66 loaded in my K3.  I notice that 
>it still only provides a sidetone volume from 0 to 40, 
>whereas it initially would go higher (up to 60), both 
>numerically and in actuality.  I commented on this some time 
>back, after the firmware was changed and the attainable 
>volume was lowered.  I know many feel that it is sufficient 
>as currently provided.  When I use headphones, the currently 
>offered range is probably sufficient.  Using the internal 
>speaker though, I have to run it up near the top.  However, 
>I preferred the range as previously provided, particularly 
>when you are driving a larger external speaker.  I've tried 
>several larger external speakers, and on most of them the 
>sidetone is pretty anemic as currently provided.  I know 
>several others who feel as I do.  Is this ever going to be 
>returned to the original range?   Why was it changed?   Was 
>it creating some other problem as originally configured?  If 
>not, I think it should be returned to the original 
>attainable level.  If you don't need that much, you don't 
>have to use it.  But some folks do prefer the higher level 
>option.  I'd sure like to see it get "on the list" for 
>updating.
>
>Dave W7AQK
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: [email protected]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to