Per an earlier post by Greg AB7R, try to calibrate on one of the 60 Meter channels such as 5403.5 kHz. Al WB6HPF
Michael E. Dobson wrote: > > I've run into a minor glitch in the assembly of K3 #379. I made it > up to the point of doing the 5W Transmitter Gain calibration without > a problem. That went fine on every band but 60M, there I get no more > than 0.4W and a ERR TxG message when I exit Tune. The installation > of the 100W amp and the final steps are on hold until I hear back > from K3support which means using the K3 in the ARRL CW contest this > weekend is very much in doubt. > > On the other hand, while waiting for a reply I snagged VP6DX on 17M > at about 22:55Z with my trusty K2 for my first QSO with them. > > 73, > Mike WA3KYY > K2 #2221 > K3 #379 > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://www.nabble.com/K3--379-minor-stumble-tp15491817p15491917.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
