Doug wrote: And on that issue, there was some talk of being able to reconfigure >the firmare so that DTR could be the FSK input when in DATA mode. I've not >been keeping up thoroughly- has this happened? I can't find a mention >of this feature. It would allow real FSK without any extra hardware. >
>From what I remember, Lyle said this was not possible. FSK has to be keyed to >the designated pin on the ACCY port. This is actually a digital input line, not DTR or RTS. ------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 K3#0009 On Wed Feb 20 8:41 , Doug Faunt N6TQS +1-510-655-8604 sent: >I've finally gotten it together to hook this up. The RE Standard has >a CAT port, which is configurable to RS232, but without DTR and RTS, >so I used the extra serial port (which does have those lines) for the >connection to the K3, and used the CAT port with a cable to the >rotator control, which only needs TXD and RXD. Since these ports look >like standard COM ports to the computer, no problem. > >I have now downloaded the firmware to the K3 using the RE serial port, >and MixW seems to work fine, although I have misplaced my stash of >15-pin HD connectors, so haven't gotten FSK hooked up yet. > >And on that issue, there was some talk of being able to reconfigure >the firmare so that DTR could be the FSK input when in DATA mode. I've not >been keeping up thoroughly- has this happened? I can't find a mention >of this feature. It would allow real FSK without any extra hardware. > >73, doug >_______________________________________________ >Elecraft mailing list >Post to: [email protected] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
