No longer need the KSB2 SSB Adapter (with 2.6 B/W mod) or the KIO2 (with cable) for the K2. Will sell separately or together. I need ay least $50 for the KSB2 & $50 for the KIO2 ($100 for both), price does not include shipping. If not sold here in one week goes on eBay. Both items include manuals.
I am a retired US NAVY Electronics Technician (Spent 4 years as an instructor.) and these are quality built components! Were working prior to removal and were placed, immediately, into ESD bags. Please note I did not remove the parts installed in the K2 for the KSB2 other than the standoff, if you have not previously installed a KSB2 SSB module then installing the KSB2 also requires the installation of several parts on the Front Panel board ... o Resistor, 68.1 k, 1%, 1/4 W o (5) Capacitors, .01 uF, 0.2" (5 mm) o Connector, 2 x 8 pin male, .100" o Resistor network, 10 k, 4 R, 8 pins o Transistor, PNP, 2N3906 AND The main RF board will also require two three pin sockets and one 12 pin socket. o Samtec SSW-112-01-G-S o Samtec SSW-103-01-G-S (two needed) o standoff and miscellaneous mounting hardware All of these parts are available in kit form from http://www.unpcbs.com/ as the KSB2 Parts kit ($6.25 + $5.50 shipping & handling). This kit also includes the three RF board connectors, plus the standoff and miscellaneous mounting hardware. You can also order each of these parts from Elecraft - [EMAIL PROTECTED] Refer to the instruction manual for specifics. These would be installed as described starting on page 13 of the KSB2 Manual. If you already have the “No-rework” kits installed then you are a step ahead Installation of the KIO2 may also require some modifications of your rig as described in the instruction manual - depending upon your version of the K2 Main RF board. Please read the instruction manuals in the section regarding installation in the K2. These are available on the Elecraft webpage. Will accept PayPal. Rich, KE0X -- View this message in context: http://www.nabble.com/FS---KSB2-SSB-Adapter---KIO2-I-O-Module---One-more-chance-tp15781448p15781448.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com