Both the KSB2 and KIO2 are spoken for. Rich
Rich (KE0X) wrote: > > No longer need the KSB2 SSB Adapter (with 2.6 B/W mod) or the KIO2 (with > cable) for the K2. Will sell separately or together. I need ay least $50 > for the KSB2 & $50 for the KIO2 ($100 for both), price does not include > shipping. If not sold here in one week goes on eBay. Both items include > manuals. > > I am a retired US NAVY Electronics Technician (Spent 4 years as an > instructor.) and these are quality built components! Were working prior > to removal and were placed, immediately, into ESD bags. > > Please note I did not remove the parts installed in the K2 for the KSB2 > other than the standoff, if you have not previously installed a KSB2 SSB > module then installing the KSB2 also requires the installation of several > parts on the Front Panel board ... > > o Resistor, 68.1 k, 1%, 1/4 W > o (5) Capacitors, .01 uF, 0.2" (5 mm) > o Connector, 2 x 8 pin male, .100" > o Resistor network, 10 k, 4 R, 8 pins > o Transistor, PNP, 2N3906 AND > > The main RF board will also require two three pin sockets and one 12 pin > socket. > o Samtec SSW-112-01-G-S > o Samtec SSW-103-01-G-S (two needed) > o standoff and miscellaneous mounting hardware > > All of these parts are available in kit form from http://www.unpcbs.com/ > as the KSB2 Parts kit ($6.25 + $5.50 shipping & handling). This kit also > includes the three RF board connectors, plus the standoff and > miscellaneous mounting hardware. You can also order each of these parts > from Elecraft - [EMAIL PROTECTED] Refer to the instruction manual for > specifics. > > These would be installed as described starting on page 13 of the KSB2 > Manual. > > If you already have the “No-rework” kits installed then you are a step > ahead > > Installation of the KIO2 may also require some modifications of your rig > as described in the instruction manual - depending upon your version of > the K2 Main RF board. > > Please read the instruction manuals in the section regarding installation > in the K2. These are available on the Elecraft webpage. > > Will accept PayPal. > > Rich, > KE0X > > -- View this message in context: http://www.nabble.com/FS---KSB2-SSB-Adapter---KIO2-I-O-Module---One-more-chance-tp15781448p15782612.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com