Hi Eric and Don.
I decided to do the k2 power mod involving r98 rf board.
The first thing I did since 10m is the key here was to do a full alignment
of 160-10m tx adjust per manual.
When aligning 10m the manual states 28200.
I would sugest that the manual states "highest frequency that would give 10
watts out on 28000khz"
For me that was 28550 which also gave 9,5 watts on 29000.
The max for 29550 was 12 watts.
After adjustments I set PO28 to 10 watts.
So a question for Eric and Don.
I used a 2k pot for the mod and the point where the rf dropped a little was
at 1,9Kohms.
I inserted a 1,8Kohms.
The rig is a lot more stable now on all bands.
If you see any concernes here please let me know.
BTW...This buity worked VP6DX 3 times on 20,17,15m cw from a lattitude of
66,2 north.
A little help from THP 1.2KFX I must admit.
And Eric...If I order a K3 now , when would my mothers creditcard be
charged? :-)
What would I need in a K3 to do a SO2R with my K2?
K2/100 3829
Tom Arntzen LA1PHA
Mo , NORWAY
( if everyone is against you , change your mind!)
( Tom Arntzen , 2005ac )
--
Jeg bruker gratisversjonen av SPAMfighter for privatbrukere.
Den har fjernet 332 søppelpostmeldinger til nå.
Betalende brukere har ikke denne meldingen i e-postene sine.
Få tak i SPAMfighter gratis her: http://www.spamfighter.com/lno
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
