> You either crimp or Solder - not both Why not? I've done both on all my crimped connections for years. Crimping breaks through any oxidation in the wire and terminal as well as providing mechanical strength. Soldering adds to both of these as well as reducing the potential for further oxidation (and increased resistance) between the wire and terminal because they are no longer exposed to the environment.
Now, if one doesn't have the proper crimping tool and risks distorting the terminal and its fit in the housing or interconnection with its mating terminal, then only soldering may be best. Or, if soldering is not practical for some reason, then crimping is fine. In that case, some dielectric grease on the parts before crimping will help minimize future oxidation and resistance build up. Most of our radio environments are limited enough so lessen the effects of oxidation and mechanical rigidity. But crimping and soldering is so easy to do, why not quickly provide the added margin? 73, Ed - W0YK _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
