What is the recommended way to make up the connectors between the 15 pin K3IO interface and a series of XV transverters?
There are other signals on the 15 pin connector not associated with transverting. I am wondering how to make up a suitable cable to extend the 15 pin port and to add the transverter connections. With the K2 cables and connectors are daisy chained. With the high density 15 pin connector it might be difficult wiring up all the signals in such a small space, let alone fitting two wires onto some of the pins. It is almost worth making up a breakout PCB and using a standard 15pin-15pin cable - assuming nobody else has produced one of these. Mike -- View this message in context: http://www.nabble.com/Reccomended-KXV3-wiring-tp16269976p16269976.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
