Hi
Its been a while since I built a K2/multi transverter setup but you only
need 4 wires for each transverter. Pins 6, 8, 9 and 1 on the transverter 9
pin connector. These are all daisy chained to each transverter. The only
difference in the K2 and K3 would be the 15 pin on the K3 end or a 9 pin for
a K2.
For the K3 connector pin 2 (AUXBUS) connects to pin 6 on the transverter.
Pin 7 (XVTR ON) connects to pin 8 on the transverter. Pin 10 (KEYOUT-LP)
connects to pin 9 on the transverter. The ground pin 5 or 12 connects to pin
1 on the transverter.
Don Brown
KD5NDB
--------------------------------------------------
From: "AD6XY - Mike" <[EMAIL PROTECTED]>
Sent: Tuesday, March 25, 2008 3:03 AM
To: <[email protected]>
Subject: Re[Elecraft] ccomended KXV3 wiring
What is the recommended way to make up the connectors between the 15 pin
K3IO
interface and a series of XV transverters?
There are other signals on the 15 pin connector not associated with
transverting. I am wondering how to make up a suitable cable to extend the
15 pin port and to add the transverter connections. With the K2 cables and
connectors are daisy chained. With the high density 15 pin connector it
might be difficult wiring up all the signals in such a small space, let
alone fitting two wires onto some of the pins.
It is almost worth making up a breakout PCB and using a standard
15pin-15pin
cable - assuming nobody else has produced one of these.
Mike
--
View this message in context:
http://www.nabble.com/Reccomended-KXV3-wiring-tp16269976p16269976.html
Sent from the Elecraft mailing list archive at Nabble.com.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
