...and the audio input cable you mention is from the fixed audio output
mod featured on Don's page does, right?
I'm still working on my K2 but I wanted to make sure I knew that the
fixed audio output mod was required for use with the SignaLink USB
before I started drilling holes in my case. ;)
Thanks.
-john W4PAH
Lee Buller wrote:
John,
That is right.....the output of the SignaLink USD goes from the RJ45 to
the Mic input. But, you have to add one more cable....the audio from
the K2 to the SignaLink USB. So, what you do is come out of the RJ45
with Transmitt Audio and the PTT line. Then use a seperate cable for
the audio input from the K2. You will need to use the Mic connector ...
at least I did not mine ... because I had no other means of feeding
audio to the K2. You have to wire the Mic as your K2 is wired which
could be anything...depending on the builder.
Lee
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
