John,
My fixed audio output is just what it says - it provides a level of
audio OUTPUT from the K2 independent of the setting of the AF gain control.
It does nothing for the audio INPUT. The input (to the mic jack) is
what is depicted on the Tigertronics website. Note that the mic wiring
shown assumes that you have configured your K2 to use the Elecraft (or
Kenwood) microphone pinout. If you are using a microphone that is wired
for anything other than Elecraft or Kenwood, you will have to alter the
wiring of the SignalLink to match your mic wiring.
73,
Don W3FPR
John Shadle wrote:
Does anyone have tips on running the SignaLink USB (not the SL-1+)
with a K2? It seems from the Tigertronics site that the 8-pin round
mic connector is used between the radio and the SignaLink.
http://www.tigertronics.com/sl_wirebm.htm#Elecraft
But, I thought that the reason folks installed the fixed audio output
mod (detailed on W3FPR's web pages) was to improve PSK and other
digital modes.
If someone could offer some clarification on this I would greatly
appreciate it (especially those who are using the SignaLink USB with a
K2).
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
