Guess I got lucky. Had an old VGA cable. Cut off the one end. Terminated it in a female DB9 RS solder plug with a plastic hood and added a transistor switch for FSK. There were no coax cables imbedded in the VGA cable. Several single wires and a few twisted pair.
What I would like to do when I get time is terminate the VGA cable in a box with terminal strips. Add jacks to the box to break out the signals on the ACC jack. This way it would be easy to add cables to other external devices. Maybe Elecraft or someone will come up with a plug in box to do this? 73, N2TK, Tony -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Charles Harpole Sent: Thursday, April 10, 2008 2:37 PM To: Timothy Raymer; [email protected] Subject: RE: [Elecraft] K3, 15 Pin Acc Cables - Commercially Made Another reason NOT to use the computer-use socket on a ham radio..... Tiny wires, tiny pins, weak strain relief.... do I need say any more..... Come on, designers: remember your customers have normal sized hands and weak eyesight!!! 73 Charles Harpole [EMAIL PROTECTED] > Date: Thu, 10 Apr 2008 12:23:43 -0500 > From: [EMAIL PROTECTED] > To: [email protected] > Subject: Re: [Elecraft] K3, 15 Pin Acc Cables - Commercially Made > > Don, > > One caveat to this: VGA cables are normally wired as a series of coaxial cables. So while you may have pin continuity, that continuity may be on a shield of RG-174/U coax buried in the jacket of a larger cable. > > I have found high density 15 pin connectors and soldered to them before. It is not fun. But in that application, it was the only way to get the correct connections, the correct wire type, and so on, connected to the device. > > Tim Raymer > 73 de KA0OUV > K2 #1383 > > >>> "Don Nesbitt" <[EMAIL PROTECTED]> 04/10/2008 11:36 >>> > I've found two (2) "ready made" cables that may be of interest to K3 owners > when using the ACC Socket. The ACC socket is referred to on page 18 of my > manual as "AUX I/O" with the caution that this is NOT a VGA video connector! > Well, it sure looks like a VGA connector but alas, no video output from the > K3 - shucks! > > For those who just don't want to fabricate a cable, most commercially > available VGA cables do not include the #9 pin and for some that do, the pin > is not connected to anything. Poo! > > Fully connected commercial cables found! > > The first is a VGA Splitter Cable ("Y" cable) with one male and 2 female > ends. It is offered by Cables Unlimited (www.cablesunlimited.com) and is > their part number PCM-2250. Search this part number on their site. It is > listed on their site for $14.99. All 15 pins are present and connected. > > This "Y" cable is carried by my local Microcenter (www.microcenter.com) and > is their part number 028126. I bought it for $9.95. You can see it at: > > http://www.microcenter.com/search/search_results.phtml?keyword=028126&submit > .x=17&submit.y=12 > > The second cable is a "Fully-Wired & Straight Thru, HD15MM" cable with all > 15 pins present and connected. The one I bought is a 3 foot Male to Male > (although it is also available in other configurations) - no snickering! > > It is made by QVS (www.qvs.com) and is their part number CC388B-03. You can > search this part number on their site. I don't believe that QVS sells > directly to consumers but you can probably find their products at most > computer stores. > > Again, I found it at my local Microcenter. It is their part number 810150. > I bought it for $14.99. You can see it at: > > http://www.microcenter.com/search/search_results.phtml?keyword=810150&submit > .x=15&submit.y=9 > > I've checked each of these cables and they do indeed have all 15 pins > connected - at least the one's I bought do (caveat filed just in case they > change their manufacturing process)! > > I don't have any financial interest in any of the above and, as usual, YMMV. > '73 es gud dxing -- Don N4HH K3 #83 > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
