Many thanks to all who responded either on or off the reflector. It would seem that no one else can replicate the problem of RX loss after TX.
Not sure where to take this now, as although there have been whispers within the Elecraft inner circle that others have reported unexplained loss of receive, I can't get a straight answer. 73 Stewart G3RXQ >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Stewart Baker >> Sent: Monday, April 28, 2008 1:30 PM >> To: Elecraft Reflector >> Subject: [Elecraft] K3 - Dead RX after TX >> >> >> Hi All, >> >> I have been experiencing a strange problem on my K3 where the >> receiver is sometimes 'dead' after transmit. This seems to be tied >> in with the MCU control of the DSP. >> >> To prove that this is either unique or not to my unit, I would be >> grateful if fellow K3 owners could try this quick test. >> >> In particular I would like to hear from Beta Testers as to whether >> they can replicate this problem with the next (unreleased) >> firmware. >> >> POWER >> 80m LSB 3780 >> NOR >> LO CUT=0.15 >> SAV ALT1 >> NOR >> TX ON/OFF >> ALT1 >> TX ON/OFF >> Receive may be dead at this point >> >> If not continue with >> Select USB >> ALT1 >> TX ON/OFF >> Receive dead >> >> Switching bands, modes or NOR always restores receiver. >> >> Many thanks in advance. >> >> 73 >> Stewart G3RXQ >> _______________________________________________ >> Elecraft mailing list >> Post to: [email protected] >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
