hi Wayne, On 4 May 2008 at 11:48, wayne burdick wrote:
> > Will TX EQ be made mode and/or input dependent? Setting TX EQ > > for voice screws up the audio response for digital mode (AFSK A and > > DATA A) operation. The same is true for RX EQ. > > I believe both RX and TX EQ are bypassed in DATA modes. If not, they > should be. I'll mention this to Lyle. > > Per-mode settings are on the list, too. I have two different micophones, one needs heavy TX EQ correction, the other one is good with neutral settings. Is it possible to store a profile for this? Settings per input would not help in my case, because I connect both microphones on the rear connector. You will ask, why do I use a different microphone? The reason is I cannot bear the good one (headset) for a long time, and sometimes have to change it because my ears hurt. And the small headset which needs correction is the choice for portable use. 73! de Werner OE9FWV -- I have seen the truth and it makes no sense. PGP-Key: <http://www.qsl.net/oe9fwv/furlan.asc> Fone +43 5522 75013 Fax +43 820 555 85 2621 Mobile +43 664 6340014 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
