I also find USB gives a greater peak output than LSB, filter 2.7k. Hope this
can be fixed.
Peak power output still only about 80 watts with CONFIG: TXG VCE set to +3dB
but if this means the output is very clean, I can live with this lower
output power.
Mike G8ALS
----- Original Message -----
From: "Roy Morris" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, May 06, 2008 1:14 PM
Subject: [Elecraft] K3 SSB Output Greater on USB
I find the SSB peak output greater on USB than LSB. This anomaly occurs on
all bands and can be as much as approximately 15 to 25 watts peak difference
depending on band. I hope this can be corrected in firmware. Roy Morris
W4WFB K3 #323
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 269.23.9/1416 - Release Date: 5/5/2008
5:11 PM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
