Bruce,
To change from Iambic B to A, when the menu item is displayed, just
rotate the VFO A knob to change the parameter.
The entire menu works similarly - rotate VFO B to select the menu item
desired and then rotate VFO A to change the parameters.
I can't help with your sidetone issue - be certain the pitch is set for
your best hearing. It may that the default pitch of 600 Hz does not
match the sweet spot for your ears.
As a clue that 600 Hz may not match your ears, I have the AF gain set to
low, and rarely rotate it beyond the 10 o'clock position - and I have a
hearing loss problem myself.
73,
Don W3FPR
Bruce McLaughlin wrote:
Now the problem. I can't seem to figure out how to change it from Iambic B
to A . I'm sure it's somewhere in the manual but I have yet to discover it.
Can anyone offer me the magic key?
The other issue is that the side tone level is rather low. The monitor
level is set to the max, i.e., 40. It is still rather low through my proset
headphones. Is there any way to boost that a bit. I get fairly decent
audio level on receive with the AF gain at about the 12 o'clock position and
with the AF gain set to high. I would like a bit more side tone level
without increasing the overall audio gain. Does anyone have any suggestions
about that?
I do thank everyone.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
