hi all, On 8 May 2008 at 5:43, Mike Scott wrote:
> I liked the K2 Bluetooth serial adapter project. > > I Googled Bluetooth serial adapters (there are quite a few) and ran > into an A7 Engineering product. > > http://www.a7eng.com/products/embeddedblue/serial/eb501-SER.htm > > It is lower cost than the Socket Bluetooth adapter. > It looks ready to embed (doesn't have to be disassembled). It needs an > antenna. I wonder how I would mount an antenna on a K3; if it were > internal it seems to me that the case would severely impede signal. I use the Blue Air adapter from Lynn Hansen KU7Q. http://www.lynovation.com/ and was available as a kit some time ago. there is some information on his homepage how to build one yourself. There is a Pocket PC program to remote control the transceiver. Works good with the K2, I did not yet plug it into my K3, but should behave the same. 73! de Werner OE9FWV -- Windows := Will Install Needless Data On Whole System PGP-Key: <http://www.qsl.net/oe9fwv/furlan.asc> Fone +43 5522 75013 Fax +43 820 555 85 2621 Mobile +43 664 6340014 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
