At 5/9/2008 07:22 AM, Dr. Werner Furlan wrote:
hi all,
On 8 May 2008 at 5:43, Mike Scott wrote:
> I liked the K2 Bluetooth serial adapter project.
>
> I Googled Bluetooth serial adapters (there are quite a few) and ran
> into an A7 Engineering product.
>
> http://www.a7eng.com/products/embeddedblue/serial/eb501-SER.htm
>
> It is lower cost than the Socket Bluetooth adapter.
> It looks ready to embed (doesn't have to be disassembled). It needs an
> antenna. I wonder how I would mount an antenna on a K3; if it were
> internal it seems to me that the case would severely impede signal.
I use the Blue Air adapter from Lynn Hansen KU7Q.
http://www.lynovation.com/
and was available as a kit some time ago.
there is some information on his homepage how to build one yourself.
There is a Pocket PC program to remote control the transceiver.
Works good with the K2, I did not yet plug it into my K3, but should behave
the same.
What is the latency and does it support control lines (DTR, CTS, etc.)?
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
