There is a CONFIG value that adjusts overall AF gain - its called AF
GAIN and can be set to Lo or Hi - but this just affects the overall
range of all af gain (and side tone I think), I found the default of
Lo was to low and set mine to Hi.
However, as someone else posted, to 'adjust' side tone etc, use the
MON control.
HOLD the cmp/pwr/mon knob (bottom right of the 4 to the left of the
main VFO knob). When you do this, niether the CMP or PWR LED will be
lit and the VFO B display will show MON nn, where nn is a numeric
value representing the monitor volume level. Then turn to adjust the
level. Just press any button or knob to go back to normal function of
CMP/PWR (which you can switch between with a TAP of the knob)
Finding items in the menus :
Both menus show the options in alphabetical order, and remember the
last menu you were on until you turn the power off.
The MAIN menu always comes up on LCD BRT and the CONFIG menu on FW REVS
73 de M0XDF, K3 #174
--
What is the purpose of the giant sequoia tree? The purpose of the giant
sequoia tree is to provide shade for the tiny titmouse.
-Edward Abbey, naturalist and author (1927-1989)
On 23 May 2008, at 23:45, Bruce McLaughlin wrote:
I am still having trouble with the rather low audio level of the
side tone
and spot tone in the CW mode on my new K-3. The other day I
received an
e-mail from a list member who suggested that those levels could be
adjusted
by using a config menu entry which specifically controlled and
adjusted the
side tone level. Try as I might I have yet to locate that entry.
That may
be because I am not very good at finding such things for some unknown
reason. I have now installed version 1.96b firmware.
Does anybody know how I can adjust the audio level of both the side
tone and
spot tone? Eager ears are waiting to know.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com