"I was on 30m cw, swr about 1.1 when suddenly I noticed my output drop from
100W to about 40W and the swr had risen to 4 or so."
Do you have a KAT3 installed? Doesn't matter if it was bypassed or not.
Several of us have had similar problems. In my case, this occurred on 20
meters, and then again on 30 meters. And while the SWR wound up recovering
OK on those bands, I wound up with a residual SWR on 17-10 meters that would
not go away - and I only resolved this by having the KAT3 replaced.
I bring this up each time someone reports something similar, as I believe
there is something here that needs to be addressed.
Phil - AD5X
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
