Franki ON5ZO wrote:
I am trying to get set up for RTTY with an MK2R+ and N1MMLogger / MMTTY.
It seems the line out is dead: I don't get a waterfall on the screen.
When I plug the cable from the other radio in the K3's slot on the
MK2R+, I get a signal. I tested the cable between rig and interface
which seems OK.
So my conclusion is: nothing comes out of the LINE OUT. I looked
through the manual but only found the LIN OUT level parameter which I
cranked up to the max but that doesn't fix it.
Any ideas? Am I forgetting something?
Are you assuming as I did that as you have the mic gain set, it should
be putting something out? Once you go into data mode, the mic gain
becomes a line gain and is totally separate. I still do not believe
this is made clear enough in the manual. Of course, it could just be me :)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
