Bob,
That is highly dependent on the computer sound card. Lyle has
recommended the setting of 10 to keep from overdriving the input of the
sound card (overdriving the sound card will cause distortion).
The 'problem' is *not* the K3 creating any distortion.
Of course, if you are driving a device that needs more audio than the
typical sound card, the range from 10 to 100 may be required - it all
depends on the device.
73,
Don W3FPR
Bob Cunnings wrote:
Interesting, that's the first time I've seen that advice. The range of
the Line Out control is 0 to 100, and according to the manual the
default is 30. Is there a distortion problem at the default setting?
Bob NW8L
On Sat, Jul 19, 2008 at 7:32 PM, Lyle Johnson <[EMAIL PROTECTED]> wrote:
... To keep
distortion to a minimum, use a level of 10 or less when feeding the sound
card input.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
