> I'm wondering if any one in this esteemed group is
> successfully using the K3 / microKeyer II / MixW combo in FSK
> mode (I'm not interested in AFSK.). If so, would you kindly
> contact me off list.
>
> I am particularly looking for help in keeping the K3 and MixW
> in the "non-inverted" state.
All of the microHAM interfaces work properly with the K3 and
MixW when configured as shown in the MixW Set-up guides that
are available for download through the "Download Documents"
link in microHAM Router's Help menu starting with Router 5.
In general, the K3 should be operated in "FSK D." MixW should
have the PTT&CAT dialog set so "Default digi mode" is RTTY and
DIG (Yaesu) is = LSB. "FSK center fq" should be set to 2210
if you are using the standard 2125/2295 Hz tones. The "Inv"
box must not be checked in microHAM Router.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
[EMAIL PROTECTED]
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of WS6X
> Sent: Monday, July 21, 2008 7:29 PM
> To: [email protected]
> Subject: [Elecraft] [K3] FSK Help
>
>
> I'm wondering if any one in this esteemed group is
> successfully using the K3 / microKeyer II / MixW combo in FSK
> mode (I'm not interested in AFSK.). If so, would you kindly
> contact me off list.
>
> I am particularly looking for help in keeping the K3 and MixW
> in the "non-inverted" state.
>
> I know I should be addressing the MixW group but the
> moderator over there gets excited if you even THINK about
> mentioning hardware. :(
>
> Thanks,
>
> Jim, WS6X
>
> _______________________________________________
> Elecraft mailing list
> Post to: [email protected]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
