Also with my K3 there is a significant reduction in the audio level
when NR is on. I don't see how the AGC would affect the NR. It's just a
function of the filtering that reduces the volume when the NR is
activated. Or is there something I am missing.
Stan
W5EWA
Houston, TX
K2/100 SN 4216
K3/100 SN 0690
Roger Stein wrote:
Hi Roy,
Try AGC THR = 5 and AGC SLP = 8....and or experiment with varying
those two parameters as you monitor a signal.
My AF gain is at the 9 o'clock position, AFX on, BIN option.
I use a couple of small RCA/Radio Shack speakers.
To my ears, the difference between NR on/off is really close to the
same audio level.
But as Lyle says, experiment, it is quite revealing!!
Best of luck!
73, Roger WA7BOC
K3 #75
On Wed, Jul 23, 2008 at 7:34 PM, Roy Morris <[EMAIL PROTECTED]> wrote:
I think I am about ready to go back to 2.16. I find the receive audio to be
too weak with NR and attenuation engaged. Roy Morris W4WFB
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
