Thanks Stewart. I loaded the latest firmware this morning (I was using 2.20) but before I did that, I tried monitoring my transmitted signal on another receiver, on the same 80m frequency that I did the test with my UK friend yesterday morning. I cannot tell any difference to the keying between having the NR switched in and switched out.
After loading 2.23, my signal sounded exactly the same on my other receiver and a report from a European station on 20m said the keying was "perfect" and there was no sign of any clicks. I now intend leaving well alone and am putting the experience down to one of the mysteries of life! 73 de Chris, G4BUE On 15 Aug 2008 at 2:04, GW0ETF wrote: > > > Don Ehrlich wrote: > > > > I just keyed my K3 with and without NR (all settings) while > looking at the > > keying waveform. I used both the internal keyer and an external > computer > > interface for keying and could not see any effect on the 5 mS rise > and > > fall > > times related to NR settings or with NR on or off. > > > > Don K7FJ > > K3 #195 latest Beta > > > > > > I just did the same as Don and like him found absolutely no > difference to > the waveform on the scope with or without NR at all settings, > internal or > external keying. > > I could however get the keying to totally loose it by switching in > the NR > while actually sending - most but not every time it would change to > a sort > of high frequency, highly overdriven chopped AM sine wave; not > something > that could be mistaken for cw keying, hard or not. Pressing buttons > like NR > while actually sending is presumably not in the script and would I > assume > come under the title of 'unpredictable'. > > Running the latest betaware, dsp tables etc and also the 5ms keying > hardware > mod. > > Stewart Rolfe, GW0ETF (K3 145) > -- > View this message in context: > http://n2.nabble.com/K3-Keying-and-NR-tp724692p725906.html > Sent from the Elecraft mailing list archive at Nabble.com. > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
