I take this back.. After doing a bit of playing with the AGC decay rate I was able to get things back in line with what I wanted for the band conditions at the moment. I gotta admit the AGC in the K3 is WAY more than I've ever had available before.
On Sun, Aug 24, 2008 at 6:04 PM, Brett Howard <[EMAIL PROTECTED]> wrote: > I think I've noticed that... Its like the filter opens up a bit and > the static comes up but then when the tone is present the filter locks > in on it after a bit and the static comes down. I have a feeling that > this phenomenon probably helps it to not obliterate weak signal CW > sigs but it can be a tad bit annoying with some of the mediocre to > loud sigs. > > I agree that its a work in progress and if there was ever a guy who > will figure out a really slick way to do it its Lyle. Lyle seems to > be growing and learning what works better along with the k3. It takes > time to get things just right. This coupled with the fact that there > is NO way to make everyone happy it can get even tougher. But knowing > Lyle he'll strike a good balance and things will improve over time. > > I'm interested to see/hear what they've been cooking up as of late... > > ~Brett > > On Sun, Aug 24, 2008 at 2:41 PM, KM5Q <[EMAIL PROTECTED]> wrote: >> Here is a comment I got off-line from a fellow who comments about CW (and I >> agree, though my comments applied to SSB): >> >> quote --> I have been using MCU 2.23, but an older DSP 1.81 to get a decent >> sound on CW. The newer DSP takes too long to sync on the CW signal and it >> sounds like very soft keying when NR is on and about F=2--3 or so. ... It >> brings the signal up out of the static, but destroys the leading edge of the >> CW signal. At least that's what I'm seeing here. >> >> --end of quote >> >> Some guys like it the way it is, but there's a lot of agreement here that >> it's a work in progress, and has even been in digress lately. I know the >> developers are listening and I'm it's going to be improved. >> >> Windy KM5Q >> Santa Fe, NM >> K3 #764 >> _______________________________________________ >> Elecraft mailing list >> Post to: [email protected] >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com >> > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
