first off VFO IND is not yet implemented its listed in the ERRATA for the owners manual. If something doesn't work then its a good idea to look in the owners manual errata document.
Next you have to set your speakers to 1 if you're using the internal speaker in the radio. You can set it to 2 spkrs if you're using headphones or stereo speakers out the back but otherwise you'll only hear the primary RX. On Mon, 2008-09-08 at 23:36 -0400, Roy Morris wrote: > I have just installed the KRX3 and set the filters for the main receiver. > The auxiliary KSYN3 has been calibrated. CONFIG: VFO IND displays UNAVAIL. > Am I supposed to be able to set the filters on the SUB? Is the SUB supposed > to be operational letting me hear two frequencies simultaneously at this > time, or is this coming in future firmware? I presently get nothing out of > SUB even when I set B-SET to antenna 1. Advancing SUB RF and AF gain does > not bring the receiver to life. Do I have a problem? Roy Morris W4WFB > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
