Don...
If by "sidetone" you mean the CW sidetone, then yes, it's still there.
Otherwise, I'm not sure what you mean by "change the sidetone source;"
I'd appreciate a brief one on that "feature." If that's that, then I'm a
bit intimidated by your "real problem." That's what I'm hoping to get
some lead about and hoping that it doesn't mean a component failure in
the K2. Thanks much for replying.
...robert
Don Wilhelm wrote:
Robert,
Does your K2 still have sidetone? If not, change the sidetone source.
If you do have sidetone, you will have to look for what the real problem
is.
73,
Don W3FPR
Robert G. Strickland wrote:
Hello...
I have been using HamRadioDelux ver 4.0 SP4 for the better part of two
years without problems with K2 5957 and KP100 amp. Tonight, the
program couldn't get a frequency reading from the radio and wouldn't
connect. Yes, the radio is on, the PORT is enabled, and the computer
RS232 port is properly configured. I note the following details:
When HRD is trying to connect, and when I'm in PORT, if I press
DISPLAY [sending a frequency reading to the computer, a la the manual]
a "partial" HRD connect screen will come up with the correct
frequency, but in a moment "disconnects." When this happens, all the
"partial" display items on the computer screen from HRD disappear
leaving me with a blank HRD window.
Since this "just" happened after a long time of successful operation,
I'm suspicious. I rolled back WindowsXP to a previous date with no
success. I cycled the radio and computer numerous times with no
success. I disconnected and reconnected the cables. I've been at
computers for almost 30 years, so I don't think I'm overlooking
something obvious. I'm concerned that something in the K2 might have
failed. Any help much appreciated.
...robert
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database:
270.6.21/1674 - Release Date: 9/16/2008 8:15 AM
--
Robert G. Strickland PhD ABPH - KE2WY
[EMAIL PROTECTED]
Syracuse, New York, USA
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
