Don
Thanks for your suggestion. I will check all plugs now.
73
aki ja1nlx
----- Original Message -----
From: "Don Wilhelm" <[EMAIL PROTECTED]>
To: "a.yoshida" <[EMAIL PROTECTED]>
Cc: <Elecraft@mailman.qth.net>
Sent: Monday, October 13, 2008 9:17 PM
Subject: Re: [Elecraft] K3 Mini plug/jack mis-contact
Aki,
There should be no difference in the various mini-plugs as long as they
are the 3.5mm type. If you are using a 2.5mm, it might work for a
while, but will be loose in the jack and will not make good contact.
If you do have a 3.5mm plug and it is loosing contact, check to be
certain the jacks protrude through the rear panel sufficiently. If the
KIO3 module is not properly seated, the jacks will be recessed and will
cause the problem you seem to be having.
73,
Don W3FPR
a.yoshida wrote:
I sometimes find that mini plug/jack on the back panel makes
mis-contact. (Line in/out, Speaker etc)
Is there recomended mini plug ?
73
aki ja1nlx
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
