Bjorn, We have already exchanged emails about this but just to be sure, did you change the TXG VCE to a lower setting? In my case setting it to - 3 dB (minimum) made all the difference. Now even in the first few seconds it puts out right amount of power.
Gary also told me te set the PS to 14.0 VDC because I was not able to get full power (100 W) om 6, 10, 12 and 160 m. Changing it form 13.8 tot 14 VDC corrected that and now all is perfect except for 160. On the Top Band it is negligible 5 W short. As far a I can tell, my K3 is doing what it´s supposed to do. During the CQ WW SSB this weekend I will give it a run for it´s money ;-) 73, Maarten 2008/10/23 Björn Mohr <[EMAIL PROTECTED]> > Rich, > > There where a lot of replies on the RX, and it's great but I also like to > comment on the K3 when it comes to SSB TX: > > Audio processing - I get great reports using the HC-4 and compression and > its easy to setup. With the 3.5 mm audio plugs I can use any headset > available, my preference is a DT-234 fitted with a HC-4. I have not used the > TX audio EQ, but I am sure you can tweak other microphones to suit your > needs with it. Another fab addition is the audio gate that came with the > latest beta firmware. It works great in silencing those noisy fans for > better readability. > > Another thing I like is the ability to set different power levels for each > band, makes it easier and faster to optimize drive power for the amp for > faster band change. > > One thing I am not happy with is the fact that my K3 puts 1.5 times the > power the first 5-7 seconds after a TUNE or band change. It is like ALC > needs some time to stabilize when I start transmitting... I believe it is a > flaw in firmware as several others have reported the same or similar > behavior, and support has been notified. Except for this, I am very happy > with the K3 also for SSB contesting and DX'ing. > > 73 de Björn /SM0MDG > > > > > On 22 okt 2008, at 16.42, <[EMAIL PROTECTED]> < > [EMAIL PROTECTED]> wrote: > > I'm curious what others are finding with the K3 on SSB in contest >> conditions. I've had mine for a few months and the difference between my >> mkv and the K3 is like night and day on cw. >> >> I havn't had a chance to really test it out on SSB. I'm getting ready to >> travel to K5NA's for CQWW and I wonder if its worth taking to replace a >> ProIII or MKV on 20 meters which will be the money band (unless 15m opens >> up). >> >> 20m will be a mess and I'd like to think the K3 will help with crowded >> band conditions. >> >> Thanks >> >> Rich - N5ZC >> _______________________________________________ >> Elecraft mailing list >> Post to: [email protected] >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com >> >> > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com >
_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
