All cables were removed, other than the LINE IN into the radio, including the line out. Headphones were worn to listen to the monitor audio. (Okay, so I didn't mention the headphones, but they are electrically isolated from everything else.)
Chad WE9V On Sun, Nov 23, 2008 at 9:41 PM, K8TB <[EMAIL PROTECTED]> wrote: > One other thought. Are you using the line out to drive your soundcard? And > if so, is your monitor level turned up on the K3? And if so, is anything in > your computer, digital mode software, allowing the incoming sound card audio > to be mixed with the outbound audio? Each software package and audio card > combo is different. There is the possibility that your setup is looping > audio back to the K3. If this is happening, it would be hard to figure out > where the feedback frequency is, and that could be tripping the K3 audio > limiters. > > Pull the line out cable on the K3 while you have the problem, and see if > it disappears. > > tom bosscher k8tb > > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com >
_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
