Thanks to AD5X and W4TV. I know exactly now.
73 Jim SM2EKM
--------------------------
Joe Subich, W4TV wrote:
The BCD encoding is the same as the FT-1000D/FT-2000.
Interfacing to a microHAM or TopTen Band Decoder requires
no internal modification (both products include pull-up
resistors on their BCD inputs). The Elecraft KRC-2 and
W9XT Band Decoders do not have pull-up resistors and will
require the addition of 2.2 - 10K resistors in the decoder
or on the KIO3 board as documented in the Negative ALC
Mod bulletin.
73,
... Joe, W4TV
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jan Erik Holm
Sent: Friday, December 05, 2008 4:00 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 Band Data
Is the K3 band data compatible with Yaesu (ex:FT1000D)
BCD band data. Looks to me that it is, or?
73 Jim SM2EKM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
