1. How many seconds of recording.
TX MEMORIES
Each transmit memory is up to 15 seconds in length.
There are eight (8) memories, arranged as two (2) banks of four (4), just like
the CW and Data memories.
RX MEMORY
There is a 90 second "endless loop". New recordings are appended to the nests
audio in the loop, and the oldest is earased as more audio is added.
2. It is stated that "recording starts at the beginning of available
space each time it is started, and will stop at the end if not terminated
sooner". This would imply that memory is not divided equally between
M1-M4 but is dynamically available, depending upon the length of the prior
recordings.
3. How is memory erased.
In the case of the TX memories, record something new. It might be extremely
short (44 milliseconds).
In the case of the Rx loop, you don't erase it, you just record over old
audio.
4. I assume that if recorded received audio on playback is heard on the
K3 speaker/phones it can also be sent to line out to enable archive on a
PC.
I make the same assumption :-)
The DVR Rx palyback audio substitutes for the main receiver audio just prior
to the AF GAIN control so you can adjust its level on playback. It is also
routed to LINE OUT.
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
