G'day Lyle, Many thanks for that. I've just discovered via the KDVR3 errata rev A that "the full set of KDVR3 features" is bundled with beta code v2.71. So far I've only been able to locate v2.67 in the beta folder. Not normally a problem accessing the latest beta so I guess it isn't currently on the site.
Regards, Mike VP8NO ----- Original Message ----- From: "lyle johnson" <[EMAIL PROTECTED]> To: "Mike Harris" <[EMAIL PROTECTED]>; "Reflector Elecraft" <[email protected]> Sent: Sunday, December 07, 2008 5:49 PM Subject: Re: [Elecraft] KDVR3 |> 1. How many seconds of recording. | | TX MEMORIES | | Each transmit memory is up to 15 seconds in length. | | There are eight (8) memories, arranged as two (2) banks of four (4), just like | the CW and Data memories. | | RX MEMORY | | There is a 90 second "endless loop". New recordings are appended to the nests | audio in the loop, and the oldest is earased as more audio is added. | | > 2. It is stated that "recording starts at the beginning of available | > space each time it is started, and will stop at the end if not terminated | > sooner". This would imply that memory is not divided equally between | > M1-M4 but is dynamically available, depending upon the length of the prior | > recordings. | > 3. How is memory erased. | | In the case of the TX memories, record something new. It might be extremely | short (44 milliseconds). | | In the case of the Rx loop, you don't erase it, you just record over old | audio. | | > 4. I assume that if recorded received audio on playback is heard on the | > K3 speaker/phones it can also be sent to line out to enable archive on a | > PC. | | I make the same assumption :-) | | The DVR Rx palyback audio substitutes for the main receiver audio just prior | to the AF GAIN control so you can adjust its level on playback. It is also | routed to LINE OUT. | | 73, | | Lyle KK7P _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
