Hi Frank:
I think I have your answer. Try this.
Turn the SUB on
Don't press BSET
Hold RX ANT
You should alternately see MAIN and AUX as you hold the RX ANT button. Now
hold BSET. When the display changes it will tell you which antenna is on
your sub receiver. It will be either MAIN or AUX as you left it when you
changed it with BSET off.
Maybe it's a bug in the code. The sub antenna can be changed from the main
display only not from the BSET display.
73,
Mike K2MK
Re: [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the
AUX antenna
Frank R. Oppedijk
Thu, 25 Dec 2008 02:30:32 -0800
Thanks to all people who responded on and off-list to my questions. I've
looked at the K3 schematics and have come to the conclusion that the
problem most probably is that the digital signal driving the subreceiver's
MAIN/AUX relay isn't arriving at the subreceiver. I'm going to check the
subin ans subout boards to see whether all pins are connected okay.
Merry christmas to everybody!
73,
Frank PA4N
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
