You should be able to change it from both....I just tried it and it
worked fine from both BSEt and using the RX ANt button.
Merry Christmas!
Greg
AB7R
On Dec 25, 2008, at 6:24 AM, K2MK wrote:
Hi Frank:
I think I have your answer. Try this.
Turn the SUB on
Don't press BSET
Hold RX ANT
You should alternately see MAIN and AUX as you hold the RX ANT
button. Now hold BSET. When the display changes it will tell you
which antenna is on your sub receiver. It will be either MAIN or AUX
as you left it when you changed it with BSET off.
Maybe it's a bug in the code. The sub antenna can be changed from
the main display only not from the BSET display.
73,
Mike K2MK
Re: [Elecraft] K3 Subreceiver ANT selection doesn't work - always
uses the AUX antenna
Frank R. Oppedijk
Thu, 25 Dec 2008 02:30:32 -0800
Thanks to all people who responded on and off-list to my questions.
I've looked at the K3 schematics and have come to the conclusion
that the problem most probably is that the digital signal driving
the subreceiver's MAIN/AUX relay isn't arriving at the subreceiver.
I'm going to check the subin ans subout boards to see whether all
pins are connected okay.
Merry christmas to everybody!
73,
Frank PA4N
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
