Hi Ken, You can just refer back to the inventory list in p.7-9 of your KRX3 assembly manual. In the list, the dimensions of the hardwares are given.
In the past, a wrong size standoff was given to my KNB2. Just check the inventory list first, if there are wrong parts, simply send elecraft an email and they will send you the replacement right the way. cheers, Johnny Siu VR2XMC K3# 0046 and many K2s --- 2008年12月29日 星期一，Kenneth Lopez <[email protected]> 寫道﹕ > 寄件人: Kenneth Lopez <[email protected]> > 主題: [Elecraft] KRX3 Mounting Problem > 收件人: [email protected] > 日期: 2008 12 29 星期一 下午 3:18 > Howdy, > > I have nearly completed the KRX 3 installation, but have > run into a physical mounting problem > > The two 1 1/2" 4-40 screws are not long enough to > reach the stand offs below the KRX3 module > > I have VERY carefully followed instructions. There have > been some missing standoffs which I had to supply from my > own stock. As a result I have been careful to measure all > of the screws and standoffs. > > It appears to me that many of the standoffs mounted on the > RF board are too short. > > The KRX 3 module rests on the battery, and mates correctly > with the pins on the mating boards. It has what looks to be > the right amount of clearance above the RF board toroids. > > I took the side panel off to better see the clearances. It > looks as though the supplied screws are at least 1/2" > too short. > > What in heck is going on? Have I done something wrong? > > Or do I have the wrong screws supplied? Or the wrong > standoffs? > > Cheers, > > Ken N6TZV > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com Yahoo!香港提供網上安全攻略，教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多! _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
