Hi, I am on the latest firmware, 2.76. Recently I have played around more with AM listening on the SWL bands and generally found it enjoyable (audio clearly there from 100-4200Hz when set to do so!!). However there is definitely an anomaly with the VFO tuning rate (steps per revolution "VFO CTS"). For normal SSB ham band use I have this set at 400. If I go to AM mode and press coarse to set the step to 1kHz, this gets changed to 100. This may be intentional; at this big tuning step, 100 steps per revolution is OK. But if I go back to SSB and 10Hz tuning step, the "CTS" is still at 100. I believe this has been around for a while since I have many times inexplicably found my "CTS" being set to 100. I can't recall seeing that the "CTS" should be mode dependent in any way and I think it's best if left totally mode independent.
Knut - AB2TC ----- AB2TC - Knut -- View this message in context: http://n2.nabble.com/VFO-CTS-changing-tp2111105p2111105.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
