I am not sure that VFO CTS is working properly in 2.78. One complete revolution of the VFO knob changes the frequency 2KHz in CW mode for me. This appears to be the VFO CTS value of 200. However, I see no difference if I have the value at 100, 200, or 400. Am I missing something here?
At 1/4/2009 08:25 PM, wayne burdick wrote: >I this is really happening, Knut, I'll fix it in the next revision. >Thanks for letting me know. > >73, >Wayne >N6KR > >On Jan 4, 2009, at 5:15 PM, ab2tc wrote: > >>I am on the latest firmware, 2.76. Recently I have played around more with >>AM listening on the SWL bands and generally found it enjoyable (audio >>clearly there from 100-4200Hz when set to do so!!). However there is >>definitely an anomaly with the VFO tuning rate (steps per revolution "VFO >>CTS"). For normal SSB ham band use I have this set at 400. If I go to AM >>mode and press coarse to set the step to 1kHz, this gets changed to 100. >>This may be intentional; at this big tuning step, 100 steps per revolution >>is OK. But if I go back to SSB and 10Hz tuning step, the "CTS" is still at >>100. I believe this has been around for a while since I have many times >>inexplicably found my "CTS" being set to 100. I can't recall seeing that the >>"CTS" should be mode dependent in any way and I think it's best if left >>totally mode independent. >> >>Knut - AB2TC > > >--- > >http://www.elecraft.com > >_______________________________________________ >Elecraft mailing list >Post to: Elecraft@mailman.qth.net >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): >http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
