1) Insufficient USB power to the USB <=> serial converter. 2) Maybe the driver for the USB <=> serial converter, but I strongly suspect 1).
Simon Brown, HB9DRV www.ham-radio-deluxe.com ----- Original Message ----- From: Clark Macaulay I posted this on the HRD Forum with little response so I'm trying for the collective wisdom of this august group. I have two radios: a FT1000 MarkV Field and a K2. Both are connected through separate USB bridges using the Proflif chip set to my USB port on a computer runniing XP SP3. Both radios communicate fine with Logger32. Only the FT1000 seems to be working with HRD; the K2 appears to be loosing characters as the frequency drops digits and/or the mode as read by HRD changes erratcially. I've triple checked the configuration and have loaded the current drivers from the Prolific website. I have also swapped the K2 between the 4 USB bridges I have and the problem moves with the K2. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
